Zyrnolink Header



Tuesday 10 July 2012

Operamini/Ucweb configuration

If you have not downloaded the latest super modded operamini handlerUI, by our group, please download it.
After downloading your operamini, or if you already have it in your mobile phone, below is how to get it configured.

The recent Ucweb or Operamini are encoded with:
Settings
Custom Name
HTTP Server (primary)
Socket Server (secondary)
Front Query
Middle Query
Back Query
Back Links
[X] Remove port frm URL
Host
Username
Password

Now that you have seen these slated encodings, what you need to do there is to apply any free browsing codes into it. In the Settings, leave it and come down to Config Name, apply your codes there, i.e. http://82.145.210.0:80. The codes, when applied in Config Name, will automatically apply itself as the settings. Apply the same code to the HTTP Server or Primary Server that is below the Configuration Server. Below the HTTP Server is the Socket Server or Secondary Server. In the Socket Server, input the socket codes there, i.e. Socket://82.145.209.169:1080.
Now in the Queries, e.g front, middle & back queries should be empty, also leave the filter empty. When I say empty, I mean that you should not enter anything inside them. Below the Filter, there is an option for you to either tick or untick in order to remove or add port to URL. What you need to do here, is for you to follow what you were told by the one that gave you the free browsing codes. But by default, it is not ticked. Below this, is an option for you to select the type of host, and this option e.g No Proxy, HTTP, Host and Real Host, is exclusive to the Super modded operamini by our group.
After the option, what next is the Host, unlike the previous encodings that are without it. Put your Host there, e.g
10.199.212.8 or
www.mtnfootball.com or
www.mtnonline.com or
41.220.77.185 or
41.220.77.210 etc.
After this, leave your username and password blank, then click OK. As it is installing, it will prompt you for some options, select YES/OK, and choose your choice of network. Note: If it didn't install, keep trying it, until it installs. After the installation, a web page will open depending on how it was modded. What you need to do here is to select Accept. In your browser's bookmarks, click on Facebook
or CNN, it will prompt you to drag the blue/black cursor by pressing 5. Do it until the cursor drags to the end, and the page will begin to load. After this, your browser is now ready to browse!
Note: You have to adjust your image quality and other things by going through Tools or Settings.
Follow the above steps to configure your Ucweb. Ucweb will set its network after installation, but Operamini will prompt you to Accept.
To download Ucweb, click here.

For enquiries, you can meet 'Ucheonye Nzubechi

No comments:

Post a Comment